65cm Satellite Dish $30

One important thing you'll need with your satellite decoder box is a dish. The 65cm dish is the most popular choice for customers, as it combines small size with great performance.

This dish will allow you greatest flexibility when choosing which satellite you'd like to lock on to, and will offer a good signal from the common satellites like the Optus satellites.

You will also need an LNB to go with this dish. For more information on the LNB, click here.

Dish Type - Offset Feed

Offset angle 26.6

Aperture Efficiency >80%

Gain at 12.5 GHz Ku 39.8dB

Elevation Alignment 15 degrees to 65 degrees

Azimuth Alignment 360 degrees

Mounting Pole Diameter 3-7cm Outside Diameter

Max wind speed during operation 90Km/h

Maximum wind speed before it's likely to become a frizbee 180Km/h.

We also have a H to H Mount for our 65cm dish $120.

This positioner can be used with all our satellite receivers, and you do not need a positioner box for it to work.

All the information for the satellite positions is stored in the unit, and so long as your receiver is DiSEqC compatible, it will work without a positioner.

To plug it in, you use the wire currently going to your LNB to plug directly into this positioner, then you use a short (1.5m) fly lead to connect the positioner to the LNB.

Full instructions are provided, as well as mounting brackets and all the nuts and bolts you may need.

This unit comes with a 1 year warranty.

For more information, please Email Us.